- -
UserInfo

Welcome Anonymous




Membership:
Latest: autoloverzz
New Today: 0
New Yesterday: 0
Overall: 914

People Online:
Members: 1
Visitors: 1
Bots: 6
Total: 8
Who Is Where:
Members:
RogerForums
Visitors:
01. News
 Bots:
01. Forums
02. Forums
03. Forums
04. CPGNuCalendar
05. Login
06. Forums

Staff Online:

No staff members are online!
We have received
35969068
page views since
July 27, 2010

Hits New Today: 5806
Hits New Yesterday: 21657

Server Time
22 April 2018 07:29:29 AEST (GMT +10)
Mustang Technical Discussion > Pre 1973 > American Autowire Turn signal / reverse light wiring > Community Forums > Mustang Forum Australia - Mustang Tech

New PostsLast 24hrsUnanswered
Forum Index > Pre 1973

American Autowire Turn signal / reverse light wiring Reply to topic

Go to page 1, 2, 3, 4 Next
Author Message
Ronin187
Mustang Star

Offline
Joined: Apr 24, 2014
Posts: 351
Location: Sydney

0 👍 / 0 👎


G'day guys, first post here and I'm already asking for help!

I know this has been covered off on before, but im still a little lost.

So I've installed the 67 AAW kit, and I'm nearing the end of the installation, with only the rear lights left to hook up. I've purchased a set of the LED back-up / indicator lights from Steph and I'm a hitting walls here.

I know I've got to swap the brake switch wire ( 17A - white ) with the back-up light switch. Now is that the wire that runs to the NSS?

Additionally, is the trunk I swap the brake light wire with the light green back-up lamp feed.

Is this correct or have I managed to stare at this so long I'm not understanding what really needs to be done?

I appreciate any help in advance, and I'll get some photos up soon.

Cheers!


View user's profileSend e-mail
ozbilt
Site Admin

Offline
Joined: Jul 27, 2010
Posts: 10416
Location: Now at the Duggo Ranch

0 👍 / 0 👎


You need to scan the LED schematic & post here. That will help any explanation.


Kerry

"Thank you Boofhead for the wonderful memories"

View user's profile
boofhead
Mustang King

Offline
Joined: Nov 02, 2010
Posts: 4505
Location: Brisbane

0 👍 / 0 👎


Welcome to Mustangtech.

Which kit did you get? It is hard to help without knowing how it is design to be wired up - as suggested a wiring diagram for the kit will help.


I will someday think of something clever to say.

View user's profile
donoauto
Mustang King

Offline
Joined: Jul 27, 2010
Posts: 2348
Location: Rippin' a skid

0 👍 / 0 👎


Ronin, Welcome to the forum! What is the rear light configuration?
i.e. are you running separate tail lights, brake lights, indicator lights & reverse lights or are the reverse lights shared with the indicators?
Are the indicators shared with brake lamps?
etc etc.

Have you got any naked photo's of your Mrs? Would you like some? Laughing

(thought I'd christen the newcomer straight off the bat fella's !! - I'll help him with the answers but we both need to laugh in the process)


(PRAYER) Oh thank you Wild Turkey American Honey & Cola in those small thin bottles, for giving me the strength to act like a half wit, and say stupid things at inappropriate times, semi-anonymously, on a public forum.
Amen.

View user's profilePhoto Gallery
donoauto
Mustang King

Offline
Joined: Jul 27, 2010
Posts: 2348
Location: Rippin' a skid

0 👍 / 0 👎


I'm assuming this is the AAW kit you're using.
AAW 1967 Mustang kit


(PRAYER) Oh thank you Wild Turkey American Honey & Cola in those small thin bottles, for giving me the strength to act like a half wit, and say stupid things at inappropriate times, semi-anonymously, on a public forum.
Amen.

View user's profilePhoto Gallery
Nuts
Mustang King

Offline
Joined: Jul 31, 2010
Posts: 4252
Location: Can someone send me some of that "Clean" coal for my furnace. My wood has frozen..

0 👍 / 0 👎


Mate, welcome to the forum but be warned, if you accept any advice from the idiots on this forum, you're nuts!! :rotfl: Pics do help calm them down though!


My Motto - Don't get Caught! If you do, Blame Someone Else!

MUSTANG - Fantastic Not Plastic

View user's profileSend e-mail
nassi
Mustang King

Offline
Joined: Aug 01, 2010
Posts: 6491
Location: Perth

0 👍 / 0 👎


Nuts wrote
Mate, welcome to the forum but be warned, if you accept any advice from the idiots on this forum, you're nuts!! :rotfl: Pics do help calm them down though!


No!Your Nuts. Laughing


View user's profilePhoto Gallery
S[_]SPECT
Mustang Maniac

Offline
Joined: Jul 28, 2010
Posts: 1259
Location: WILD WEST - SOR

0 👍 / 0 👎


donoauto wrote

i.e. are you running separate tail lights, brake lights, indicator lights & reverse lights or are the reverse lights shared with the indicators?
Are the indicators shared with brake lamps?
etc etc.


If Im reading the OP correctly, he is simply doing the mod of moving the indicators down to the reverse lamps..
albeit using LEDs and AAW wiring.

Assuming both are designed to work with stock systems, then the process is the same..
The brake and backup circuits need to be swapped at the column, and at the housings.

That would be assuming the LEDs are single input though.. which Im guessing they are not.
If they are 1157 type.. then you will actually need an additional wire

See the description here if this is the kit you are using..
www.mustangproject.com...151439ff50



This kit is for cars with an extra wire added from the brake switch to the rear of the car.


Cheers,
Birchy...
Dodgy Bros. Customs

Suspect 67 - www.mustangtech.com.au.../t=52.html

View user's profilePhoto Gallery
ponyride
Mustang Maniac

Offline
Joined: Aug 15, 2010
Posts: 1979
Location: Perth, W.A.

0 👍 / 0 👎


Good to see you back Birchy. Drink


Rick.

Old things amuse all minds.

View user's profilePhoto Gallery
S[_]SPECT
Mustang Maniac

Offline
Joined: Jul 28, 2010
Posts: 1259
Location: WILD WEST - SOR

0 👍 / 0 👎


I've always been lurking Rick, just never had anything worth saying..


Cheers,
Birchy...
Dodgy Bros. Customs

Suspect 67 - www.mustangtech.com.au.../t=52.html

View user's profilePhoto Gallery
ponyride
Mustang Maniac

Offline
Joined: Aug 15, 2010
Posts: 1979
Location: Perth, W.A.

0 👍 / 0 👎


S[_ wrote
SPECT"]I've always been lurking Rick, just never had anything worth saying..


It doesn't stop anyone else. Laughing


Rick.

Old things amuse all minds.

View user's profilePhoto Gallery
Ronin187
Mustang Star

Offline
Joined: Apr 24, 2014
Posts: 351
Location: Sydney

0 👍 / 0 👎


HA! I like this place already!!

I left out some pretty pertinent points - but hey, it was zero dark thirty and I was still downing my grande latte enemia.

So I'm using the Mustang project dual back-up light / turn signal indicator system with the AAW 67 retro update kit, and the LED "batwing" brake lights.

The stock bulb sockets have three wires coming out of them - Black x 2 , black red x 1.

So the goal here is, as Suspect stated, to move the indicators down to the back-up lights, leaving the brake lights to do just that - sear the eyes of ball-bag Mosman drivers with burning red leds.

Photos to follow.


View user's profileSend e-mail
ozbilt
Site Admin

Offline
Joined: Jul 27, 2010
Posts: 10416
Location: Now at the Duggo Ranch

0 👍 / 0 👎


The stock bulb holders would have 3 wires (or more specific, 3 groups of wires). The black going to ground (earth) from the side of the socket. The other 2 wires are tail lights & stop/flasher lights.

You move the flasher light wire to one side of the dual filament socket that would be now in the backup light.

So now all you have is tail lights in the rear.

You now need to run a wire from the "output" of the brake switch to the rear of the car & connecting to the brake light side of the tail light sockets.

Make sense?

BTW, welcome to the mad house ...... Wink2


Kerry

"Thank you Boofhead for the wonderful memories"

View user's profile
Ronin187
Mustang Star

Offline
Joined: Apr 24, 2014
Posts: 351
Location: Sydney

0 👍 / 0 👎


Okay here's the AAW wiring schematic that I'm working with. I'll take some photos of the actual setup in the boot.
Attachment: 67 wiring.jpg
Description
Filename 67 wiring.jpg
Filesize 96.34 KiB
Downloaded 23 Time(s)
You are not allowed to view/download this attachment


View user's profileSend e-mail
Ronin187
Mustang Star

Offline
Joined: Apr 24, 2014
Posts: 351
Location: Sydney

0 👍 / 0 👎


wait... can you guys even see that??


View user's profileSend e-mail
All times are Australia/Sydney
Go to page 1, 2, 3, 4 Next


Jump to:

TopPostersToday
   123abc 
 Posts: 
 3 

   Shaunp 
 Posts: 
 2 

   lifeis4living 
 Posts: 
 2 

   Husky65 
 Posts: 
 1 

   MustangMedic 
 Posts: 
 1 

   Ausjacko 
 Posts: 
 1 

LatestForumPosts
Last 10 Forum Messages

alternator size
Last post by lifeis4living in Pre 1973 on Apr 21, 2018 16:24:52

NSW: Rear brake blinker configuration 65-66 Mustang
Last post by Husky65 in Pre 1973 on Apr 21, 2018 08:16:25

Project Lil Blue Coupe
Last post by Dwayne in Mustang Projects on Apr 20, 2018 10:38:41

Edz 66 Convertible
Last post by hybrid in Mustang Projects on Apr 20, 2018 10:29:09

2020 Shelby GT500 spy shots
Last post by hybrid in 2015 onward on Apr 20, 2018 08:08:11

Project Pheonix
Last post by nassi in Mustang Projects on Apr 19, 2018 21:43:08

Vale David Channon aka Boofhead.
Last post by nassi in Events on Apr 17, 2018 21:24:48

67 radiator
Last post by hybrid in Wanted - Parts on Apr 17, 2018 09:53:48

Door glass seal
Last post by 66STNG in General Tech Advice on Apr 16, 2018 19:25:24

Mustang to be in Supercars
Last post by hybrid in 2015 onward on Apr 16, 2018 12:04:58