Getting there but please excuse the crap welding, no point in cleaning up just yet.
Overall happy with the pedal position. Now to round up the 1 inch DD and set the column position. Also need to find an upper mount to suit the collapsible column. Might be next Saturday's chore, trawl the wrecking yards.
Waiting for some 1"DD shaft to finish the steering/pedal box mock up so I had a play with the shifter.
After mucking around with mods to the original shifter and not being happy with the outcome I found this little adapter at the local hot rod parts place.
Needed to make little adapter,
Thread the end for the shifter handle.
The overall ugly little thing
and in place
I think I will still have to modify the seat though, the throw on that box is bad enough normally but now I have extended the shifter it is quite large. Anyway time will tell.
The logos and trademarks used on this site are the property of their respective owners.
We are not responsible for comments, advice, opinions, products or services posted by our members, as they are the property of the poster.