Ok, been a while since an update. Where I left it was the GV was in but the yoke didn’t fit properly and the exhaust clearance was an issue. Gear Vendors jumped quickly on the yoke issue and after a couple of new ones were sent and a bit of white grease it slipped in nice so that was sorted.
Got the tailshaft shortened (it is quite a short one now) and spent some time today re-installing the tailshaft and modifying the exhaust thanks to the skills of Hybrid’s mig welding. A lot of fun actually getting the right bends etc. we actually nailed every cut first go which was a pleasant surprise. Photos of it all below.
"The simple answer is, even if I have decided I still don't know what to do."
Last edited by cage on Sat Mar 03, 2018 5:40 pm; edited 4 times in total
The logos and trademarks used on this site are the property of their respective owners.
We are not responsible for comments, advice, opinions, products or services posted by our members, as they are the property of the poster.