I'd guess that most IT cage nuts would be metric these days.
Still that's worth a thought if I strike out in OZ. It's easy enough to make the square threaded nut portion in UNC from some 5mm mild plate, and peel back one side of the retaining lug and pop it in. So you can convert them into another thread. But it's a hassle.
It's usually the spring part that breaks off on one side or the other.
The OD of the sprung cage is the most important measurment for this job.
Grumpy old git!
Last edited by mungus on Tue Oct 24, 2017 10:15 am; edited 1 time in total
The logos and trademarks used on this site are the property of their respective owners.
We are not responsible for comments, advice, opinions, products or services posted by our members, as they are the property of the poster.