Looks like the block is cracked - Never, ever buy Dart
Moderator: Moderators
Re: Looks like the block is cracked - Never, ever buy Dart
will be interesting to see what it actually is. I was fairly certain my motor had an issue with the lifters but it actually was...
'68 J-code GT Fastback
'67 S-code GT coupe, 'Pink Bitz' formerly known as 'Hookin' up a brother'
'69 M_____ GTS Fastback 'Blasted'
'67 S-code GT coupe, 'Pink Bitz' formerly known as 'Hookin' up a brother'
'69 M_____ GTS Fastback 'Blasted'
Re: Looks like the block is cracked - Never, ever buy Dart
Pull it out and Ill give you hand, Ive got a nicer cam here as well more suited to it, was a custom one of Boofs Expensive cam to have made you can have it for what I gave boof, was trying to help him out with $ when he was sick. If it needs a couple of sleeves its no biggy. It picked up the pistons once I dont think it ever had enough clearance, it maybe piston on the wall. I hate pre built Crate engines have said that before?
Last edited by Shaunp on Sun May 27, 2018 12:41 am, edited 1 time in total.
Re: Looks like the block is cracked - Never, ever buy Dart
Hi,
Cam sounds interesting, what are the specs?
Cam sounds interesting, what are the specs?
Re: Looks like the block is cracked - Never, ever buy Dart
Its a Jay Allen custom ground Hydraulic roller with Bullet lobes.
600 thou lift
231/244 @ 50
287/309 overall
max power 6100 but will rev to 7k idle around 850
600 thou lift
231/244 @ 50
287/309 overall
max power 6100 but will rev to 7k idle around 850
Re: Looks like the block is cracked - Never, ever buy Dart
oooh A fraction meatier that the one I currently have, Hmm 500HP 363?
My existing springs are probably good for the job as well. Unsure how well it would play with the AOD (I currently have a 2800 stall)
My existing springs are probably good for the job as well. Unsure how well it would play with the AOD (I currently have a 2800 stall)
Re: Looks like the block is cracked - Never, ever buy Dart
Just try it, think it will be ok. whats the diff ratio, these are bullet lobes so plenty of area under the curve. It will wake it up.
Re: Looks like the block is cracked - Never, ever buy Dart
So my drivetrain is a 3.55 true trac 8 inch, alloy tailshaft from CJ, B&M AOD with 2800 stall.
17x9 with 245 Pirelli's on the back.
17x9 with 245 Pirelli's on the back.
Re: Looks like the block is cracked - Never, ever buy Dart
give it a go I say it will be good with injection its 111 centres good idle plenty of vac
Re: Looks like the block is cracked - Never, ever buy Dart
Did you go with something bigger?
Re: Looks like the block is cracked - Never, ever buy Dart
Kind of, I got an Inverse roller cam made by Jones cams to try, suppose to make max power at 6900, if I dont like it I'll put a solid roller Lunati oval track cam in it one the ones below, that will sort it out.lukep6470 wrote:Did you go with something bigger?
http://lunatipower.com/Product.aspx?id=1635&gid=271
http://lunatipower.com/Product.aspx?id=1634&gid=271
Last edited by Shaunp on Tue May 29, 2018 7:36 am, edited 1 time in total.
Re: Looks like the block is cracked - Never, ever buy Dart
OK so I just went and picked up the 2nd head from testing. The cylinder head guy wants me to try another set of head gaskets but this time use copper spray on the gaskets.
From what I've read that copper spray is a bad idea on any sort or modern head gasket, any thoughts?
From what I've read that copper spray is a bad idea on any sort or modern head gasket, any thoughts?
Re: Looks like the block is cracked - Never, ever buy Dart
On MLS gaskets I've used them. Not on normal headgasket. What gaskets have you got?
Re: Looks like the block is cracked - Never, ever buy Dart
looking at trying a set of stock replacement Felpro FE8548PT-2 mainly due to cost, if they fix it then I will replace with something better.
I'm a head gasket swapping pro now
I'm a head gasket swapping pro now
Re: Looks like the block is cracked - Never, ever buy Dart
So these are teflon coated, Felpro will void warranty if used with copper spray.
https://www.engineaustralia.com.au/site ... /SB043.pdf
https://www.engineaustralia.com.au/site ... /SB043.pdf
Re: Looks like the block is cracked - Never, ever buy Dart
Yeah I wouldn't use copper spray. Like I said I've only used it on cometic mls gaskets, and never heard of it being used on a stock gasket. Don't know why you would need any sealer on a stock style gasket?
What bore size is it at the moment? I am using the felpro 9333pt1's. They are cheap, and awesome. Probably have the best reviews on any gasket I've seen. They handle boost no dramas. All the mustang guys in the states use them on boosted and high performance motors. Can't see it having any dramas on yours. I got mine from Rockauto, cost about $60aud delivered. I actually bought 2 sets, cause it's 21aud for the gaskets and 39 for the shipping. I would offer you my set, but I'm changing heads in a couple days.
What bore size is it at the moment? I am using the felpro 9333pt1's. They are cheap, and awesome. Probably have the best reviews on any gasket I've seen. They handle boost no dramas. All the mustang guys in the states use them on boosted and high performance motors. Can't see it having any dramas on yours. I got mine from Rockauto, cost about $60aud delivered. I actually bought 2 sets, cause it's 21aud for the gaskets and 39 for the shipping. I would offer you my set, but I'm changing heads in a couple days.
Last edited by Husky65 on Wed May 30, 2018 5:04 am, edited 1 time in total.