67 FG Resto Mod
Moderator: Moderators
Re: 67 FG Resto Mod
I thought you only had half a Cuda, half rust holes.
Re: 67 FG Resto Mod
Got a little bit more done this weekend - even in the tropical weather conditions we have had here.
I tidied up the rails, removing the engine mounts and lower control arm mounts
I've checked the measurements, diagonals are good, from the datum line to left and right rail 2-3mm difference. Do you think this will be an issue.
Little bit more cutting to do before I can box the rails and install the TCI front end.
I tidied up the rails, removing the engine mounts and lower control arm mounts
I've checked the measurements, diagonals are good, from the datum line to left and right rail 2-3mm difference. Do you think this will be an issue.
Little bit more cutting to do before I can box the rails and install the TCI front end.
Re: 67 FG Resto Mod
Progress has been slow, still making some headway
Some pictures of the progress
Had to trim the flange off the chassis rails in prep for the new IFS
Welded up rails and prep with weld through primer
Removed the dash, cowls, firewall
Prep firewall
Firewall welded in
Firewall installed and a bit of primer put on.
Not a bad effort considering 38 outside temp, shed probably 48
Roger
Some pictures of the progress
Had to trim the flange off the chassis rails in prep for the new IFS
Welded up rails and prep with weld through primer
Removed the dash, cowls, firewall
Prep firewall
Firewall welded in
Firewall installed and a bit of primer put on.
Not a bad effort considering 38 outside temp, shed probably 48
Roger
Re: 67 FG Resto Mod
Bloody good effort mate. Best i can manage in that heat is a 6 pack.
Re: 67 FG Resto Mod
Talk to me about making the dash a bolt in.
Kerry
To our wives and sweethearts. May they never meet
To our wives and sweethearts. May they never meet
Re: 67 FG Resto Mod
And the top of the radiator support panel too!!!!!ozbilt wrote:Talk to me about making the dash a bolt in.
Re: 67 FG Resto Mod
Ozbilt, was looking to do this, but wasn't sure how. Will give you a call to discuss further.
Dwayne, I will talk to Ozbilt about this too.
These are "must do' jobs.
It's great going through this forum for all the great help and ideas you guys come up with.
Cheers
Roger
Dwayne, I will talk to Ozbilt about this too.
These are "must do' jobs.
It's great going through this forum for all the great help and ideas you guys come up with.
Cheers
Roger
Re: 67 FG Resto Mod
awesome effort. Played golf (poorly) this morning and wilted in the heat here in Brisvegas. Got home and the lure of the A/C was too great - a nap and the cricket instead.
Cheers
Craig
Craig
Re: 67 FG Resto Mod
Nice work, enjoy seeing the progress.
'68 J-code GT Fastback
'67 S-code GT coupe, 'Pink Bitz' formerly known as 'Hookin' up a brother'
'69 M_____ GTS Fastback 'Blasted'
'67 S-code GT coupe, 'Pink Bitz' formerly known as 'Hookin' up a brother'
'69 M_____ GTS Fastback 'Blasted'
Re: 67 FG Resto Mod
Another 67 Horror Story!! Just as well you have Dr Oz on your side! Talk to him often. Looking better!
My Motto - Don't get Caught! If you do, Blame Someone Else!
MUSTANG - Fantastic Not Plastic
MUSTANG - Fantastic Not Plastic
Re: 67 FG Resto Mod
Couldn't agree moreRoger wrote:
It's great going through this forum for all the great help and ideas you guys come up with.
Cheers
Roger
I just wish this forum was around when I was doing mine, would have done a number of things differently.
Re: 67 FG Resto Mod
Ants, can you PLEASE fast forward the avatar- suspense is killing me.
Nassi, I swear she moved the other night like you said.
Nassi, I swear she moved the other night like you said.
'68 J-code GT Fastback
'67 S-code GT coupe, 'Pink Bitz' formerly known as 'Hookin' up a brother'
'69 M_____ GTS Fastback 'Blasted'
'67 S-code GT coupe, 'Pink Bitz' formerly known as 'Hookin' up a brother'
'69 M_____ GTS Fastback 'Blasted'
