Mustang Tech

seeing a lot of front sway bars saying fits 65-73 is this true will a 65 fit my 70 and so forth https://www.ebay.com.au/itm/134142715355?_trkparms=amclksrc%3DITM%26aid%3D111001%26algo%3DREC.SEED%26ao%3D1%26asc%3D20211130125621%26meid%3Db354b58b5ee8424c8e43e15419a5f754%26pid%3D101465%26rk%3D4%26rkt%3...

can anyone give me the tridon part number for a 351 Cleveland temp sender fora 1970 mustang

i have a 70 mustang with power brakes disc front drum rear all are working fine ,new rear pads and regrind disc and rebuilt calipers front but the pedal has become a little hard the boster seems to work but not properly and i have no fluid issues hold pressure so coming to a stop you have to push ha...

have an early rebuilt 1970 fmx box it works fine up the gears hard or soft accel, kicks back fine when you stop at lights or a corner it just wont come back to 1st sometimes about 60% of it unless you go to neutral it has a trans go kit and 2500 stall all new parts where possible everything inside w...

what is the min thickness for a 1970 front rotor its not stamped on there anywhere

where to find front wheel bearing kit for a 70 with discs on north side of bris and what pads are good looks like my oem discs have enough meat to be machined

fan space......... i am putting a twin thermo and alloy shroud on my mustang clevo, is it better to have the shroud with a 25mm gap between core and fan shroud or is it better to have as much space between core and shroud as i can get to pull air more evenly across a bigger area and i have the room ...

all good my box suffered from idiocy they put athe wrong shift kit in years back and i never put any miles on it then ,it caused pressure issues that lead to burning the clutches and band material but all the important stuff was all good like planetary gears ,sprag ,drum all the real hard to replace...

what are you all using for trans fluid in australia its going in an fmx

can anyone refer me to a shop northside of Brisbane preferably toward morayfield area to recoe my transmission .

thanks craig what are you chasing for if mine cant be reconed pm me if you like

whats involved in going to and aod

as per my fmx slip post i took it to a shop and the box is toast so reco needed if i cant get any parts i need such as planetary gears and such what are my options if i have to go another way such as aod i don't want to modify my body or tunnel

as per my fmx slip post i took it to a shop and the box is toast so reco needed if i cant get any parts i need such as planetary gears and such what are my options if i have to go another way such as aod i don't want to modify my body or tunnel

oils good, its the stock box it came with and has been sitting for about 9 yrs look it works fine just slips under heavy load , but it was behind a tired old 351