Seeing as I'm close to getting back to the 67 thought I'd start a build thread, many of you would know some of these pics.
Car is a 67 San Jose built A code, air, steer, tinted glass, sill moulds, Vinyl top, Deluxe black trim. Was factory C4 but it getting a toploader. Build will be in a mild retro style, with as much period stuff as I can find in my sheds. Oh and RHD.
Last edited by Shaunp on Tue May 31, 2011 3:15 am; edited 2 times in total
It's pretty tight on the drivers side with the factory AC blower in the centre, clutch pedal wiper motor and foot pump. Later cars the wipe motor is in the plenum isnt it? gives some extra room The fire wall is pretty heavy gauge on that side, I was going to weld a bit of tube around the clutch push rod hole, flattened out so it picks up where I weld the nuts for the clutch master and a stiffening brace vertically down the wall next to the clutch. To try and spred the wieght of the clutch. But Ill see if I can fit something in there.
Good idea that , making the dash a bolt on. I think i will do it to my 67 vert aswell. I am making the passenger side below the glovebox removable on my 66 fastback to make it easier access to the heater box as i have the huge NC fairlane one in there. I could get it in and out without it but would be a mission.
The logos and trademarks used on this site are the property of their respective owners.
We are not responsible for comments, advice, opinions, products or services posted by our members, as they are the property of the poster.